How Much Does a Pool Deck Cost in Las Vegas?

One national cost guide puts a pool deck on the ground at $5 to $35 per square foot installed. The surface sets most of that spread, with poured concrete at the low end and natural stone at the top. Coping, tear out and the ground under the deck decide where a Las Vegas job lands.

What does a pool deck cost in Las Vegas?

Published guides price a pool deck by the square foot and the surface. One national guide’s pool patio table lists poured concrete at $5 to $15 per square foot installed. Stamped concrete runs $8 to $19, and pavers $10 to $17. Natural stone runs $16 to $35, and flagstone $15 to $32.

That guide calls a deck built on the ground around an inground pool a pool patio. Raised wood and composite decks are carpentry by other trades, so they stay out of this guide.

Our pool deck and coping work covers new decks once the pool shell is done, plus replacements and extensions. Your number comes from a written estimate after we measure.

What moves the price of a pool deck?

Square footage sets the base of a pool deck price, and shape comes next. One guide notes that unique shapes, curves and built-in seating cost more to build than simple rectangles. Tear out, coping, drainage, side-yard access, the ground under the deck and HOA approval each add a line.

A bigger deck needs more base and more material. Curves mean cut pavers or cut stone at every bend, and each cut takes time.

That guide lists a drainage system at $10 to $25 per linear foot as a deck add-on. It says a yard with too steep a slope can cost more, and lists land leveling at $500 to $1,000.

Most valley yards sit behind a block perimeter wall, so base and material come through a side gate. A narrow gate means smaller equipment and more wheelbarrow trips.

The ground can change the dig. A UNLV engineering paper describes Las Vegas caliche as rock-like and erratic in thickness and hardness. It says removal is the greatest problem caliche creates, with expense and construction delay.

HOA approval can add time before work starts. Some communities require it for a new deck surface or color, so check your covenants before you pick a pattern.

Should you choose pavers, stamped concrete or a broom finish for a pool deck?

Plain poured concrete costs the least in one guide’s pool patio table, at $5 to $15 per square foot. Stamped concrete runs $8 to $19, and pavers $10 to $17. Pavers cost more, but a single paver lifts out for repairs. A broom finish on plain concrete grips well under wet feet.

Pavers handle small ground movement because each unit can be lifted and reset. A cracked or stained paver comes out, and a new one goes in. Compacted base sits under every unit in our paver installation for decks and patios.

Pattern and base depth move a paver price inside its range. Our guide to paver prices by project breaks those costs out for valley yards.

Stamped concrete is one slab with a pattern pressed in and a sealer on top. A second national guide prices stamped concrete pool decks at $12 to $20 per square foot, including labor. On a pool deck, the stamped concrete we pour and seal gets grit in the sealer for wet feet.

A crack in a stamped slab is harder to hide than a swapped paver. The sealer also needs renewing on a schedule. Our stamped patio price tiers and sealing costs cover that upkeep.

Plain concrete with a broom finish is the simplest pool deck. A stiff broom drags thin, shallow grooves across the fresh surface. One guide says that texture provides slip resistance, which makes it ideal for pool decks.

Color and stone type change how hot a deck feels. The EPA describes cool pavements as paving materials that reflect more solar energy and stay cooler than conventional pavements. On a pool deck, that points to lighter colors over dark ones. One coping guide says natural stone stays cooler underfoot than concrete on hot summer days.

What does pool coping cost?

One national guide lists pool coping at $40 to $80 per linear foot, labor and materials included. Concrete coping sits at the low end, at $40 to $55. Natural stone sits at the top, at $60 to $80. Replacing old coping costs more than setting new coping on a new pool.

Brick coping lists at $45 to $65 per linear foot, and paver coping at $50 to $70. Travertine runs $55 to $80. Concrete coping can be poured in place or precast, the guide says. Brick and travertine are porous and need sealing.

A small plunge pool might need only 40 linear feet, the guide says. A large freeform pool could need 150 feet or more. At those rates, 40 feet of concrete coping runs about $1,600 to $2,200. A 150 foot run of natural stone runs about $9,000 to $12,000.

On a concrete pool, coping is set in mortar on the bond beam, the top edge of the pool wall. A flexible joint goes between the coping and the deck, so the deck can move without pushing on the coping. Curved and irregular pools cost more to cope than simple rectangles, the guide adds, because of the cutting and fitting.

If the bond beam needs repair first, the guide expects added structural cost. That repair, the tile line and the plaster stay with the pool builder.

What does it cost to replace an old pool deck?

Replacing an existing pool deck costs about $5 per square foot more than a new one, one guide says. That covers removing and disposing of the old deck. A second guide puts replacing a pool deck with a concrete patio at $6,000 to $15,000. What sits under the old deck sets the rest.

On a 400 square foot deck, that rate adds about $2,000. The old deck comes out first, down to the base. When a deck has sunk, we check whether the base settled or water washed it out.

We mark sprinkler lines and pool equipment runs before any concrete gets broken out. New base goes in and gets compacted before the new surface.

The joint at the coping gets its own look on a redo. If the coping is sound, the new deck meets it with a fresh flexible joint. If it is loose or chipped, replacing it during the deck work saves a second tear out later.

A replacement deck in plain concrete is poured like the broom-finished slabs we pour for patios. We slope every pool deck away from the water and the house.

Do you need a permit for a pool deck in Las Vegas?

It depends on the desk that covers your lot and the deck’s height. The City of Las Vegas exempts private concrete slabs not more than 30 inches above adjacent grade. A deck more than 30 inches above grade needs a city permit. Clark County, Henderson and North Las Vegas set their own rules.

The city’s slab exemption also requires that the slab not sit over a basement or a story below. That line names concrete, so a paver or stone deck gets confirmed with the desk. The city calls its list a guide and tells homeowners to check with the local building department.

In the unincorporated valley, Clark County’s building administrative code exempts walks and driveways not more than 30 inches above grade. That exemption names walks and driveways only, so we confirm a pool deck with the county desk. In Henderson or North Las Vegas, we check with that city’s desk.

The city says a swimming pool barrier is required for any swimming pool, hot tub or spa. Its permit exemptions do not cover the barrier. The barrier stays in place through the job.

A gas line for a BBQ, a fire pit or a pool heater needs a mechanical permit in the city. A licensed plumbing contractor runs that line. We build a masonry fire pit beside the pool and leave the gas work to that trade.

Permit fees come from the local fee schedule. HOA approval, where a community requires it, is a separate step. We check the rule for your parcel before work starts.

How do you get a price for your pool deck?

Send photos of the deck and the pool, rough measurements and what you want changed. We measure, check how the deck drains and look at the coping, then send a free written estimate. Each surface you are weighing gets its own line, so you can compare them side by side.

We are licensed C-18, bonded and insured, and we build pool decks across the valley. Ask for a written pool deck estimate to get started.